Sunday, June 10, 2012

ဖုန္းကုတ္မ်ား

Category:Other
Nokia
#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display
*#0000# To view software version.

*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that supports WLAN like N80
#pw+1234567890+1# Shows if sim have restrictions.

*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

*#7328748263373738# resets security code.
Default security code is 12345

Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)

Samsung

*#06# Show IMEI
*#9999# Show Software Version
*#0837# Show Software Version (instructions)
*#0001# Show Serial Parameters
*#9125# Activates the smiley when charging
*#0523# LCD Contrast
*#9998*228# Battery status (capacity, vol***e, temperature)
*#9998*246# Program status
*#9998*289# Change Alarm Buzzer Frequency
*#9998*324# Debug Screens
*#9998*364# Watchdog
*#9998*377# EEPROM Error Stack - Use side keys to select values
*#9998*427# Trace Watchdog
*#9998*523# Change LCD contrast
*#9998*544# Jig detect
*#9998*636# Memory status
*#9998*746# SIM File Size
*#9998*778# SIM Service Table
*#9998*785# RTK (Run Time Kernel) errors - if ok then phn is reset,
info is put in memory error
*#9998*786# Run, Last UP, Last DOWN
*#9998*837# Software Version
*#9998*842# Test Vibrator - Flash the screenlight during 10 sec
and vibration activated
*#9998*862# Vocoder Reg - Normal, Earphone or Carkit
*#9998*872# Diag
*#9998*947# Reset On Fatal Error
*#9998*999# Last/Chk
*#9998*9266# Yann debug screen (Debug Screens?)
*#9998*9999# Software version
*0001*s*f*t# Changes serial parameters (s=?, f=0.1, t=0.1)
*0002*?# unknown
*0003*?# unknown
FOR NEW SGH (R210, T100, A300...)
if code is in format *#9998*xxx#
try write in this *#0xxx#
SGH-600 SGH-2100
*2767*3855# Full EEPROM Reset (THIS CODE REMMOVES SP-LOCK!
but also changes IMEI to 447967-89-400044-0
*2767*2878# Custom EEPROM Reset
D820
Symbian Parte
**04* change code PIN - can use **04*old_pin*new_pin*new_pin#
**042* change code PIN2
**05* Unblock PIN
**052* Unblock PIN 2
*#7780# Restore factory settings-Need lock code
*#7370# Restore factory setting-Deep mode-Need lock code
*#2820# Show bluetooth MAC adress -Same as *#232337#
*#7370925538# Reset settings value in waller app
*#92702689# Show life time of device
Phone part
*#[IMG][/IMG]4# Show soft version
*#1111# Show FTA S/W version
*#2222# Show FTA H/W version
#9998*8376263# Show S/W version
*2767*2878# Custom reset
*2767*927# WAP reset
*2767*63342# Media reset
*2767*5282# Java reset
*2767*3855# Full reset
*#9998*377# Show error log
*#9998*842# Vibrator test
*#9998*782# Show rel time clock
*#9998*3323# Reset the device
*#9998*289# Buzz test
*#9998*523# LCD contrast test
*#9998*8378# Show debug Monitor
*#9998*2886# Toggle auto answer option
*#3888# Enter bluetooth test mode
*#4357# Show help dialog
*#9998*228# Show battery Information
*#4777*8665# retrive GPRS setting value
*#0*# Enter LCD test mode
*#9998*746# Show SIM information
*#9998*778# Show SST information
*#06# Show IMEI



SGH V200
Unlocking:
Power on the phone without SIM card and type these codes:
*2767*63342# and press green button
*2767*3855# and press green button
*2767*2878# and press green button
*2767*927# and press green button
*2767*7822573738# press button
Phone will be unlocked, but all trims are reseted !!!
Mobile phone must be fully charged

E710/715
*#32436837# DAI ON Digital Audio Interference On
*#3243948# DAI OFF Digital Audio Interference Off
*#9324# MONITOR
*#0746# SSMS MEMORY:20
*#0842# vibra on
*#0289# buzzer on
*#4357# HELP (4357) This screen!!!!!!!
*#7777# verze SW
*#8888# verze HW
*#9999# Revize HW
*#0782# cas provozu, zapnit? a vypnit? - LIVE TIMER
*#0523# 41 (80) menu: 12
*#0638# SIM: f23003 F230 030
*#0778# SST size: 10
*#9273696# Java D/L setting
*#92782# Wap user agent
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm - YAMAHA OK
*#0778# Sim Service table
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)

E700/S500 100%..... X100/X600???!!!???
#*566335# Wap model ID
#*5663352# java model
#*5663351# model
#*53696# java download mode
#*536963# serial enabl others disabled
#*536962# HTTP enabl WAPSAR disabled
#*536961# WAPSAR enabl HTTP dis
*663867 MF file dumped
*335 All MMS mes deled
*2767*77667# Spain MMS settings
*2767*78667# Portugal
*2767*65667# Netherland
*2767*29667# Czech
*2767*28667# Austria
*2767*48667# Italy
*2767*37667# France
*2767*85667# Uk
*2767*33667# Germany
*2767*73738927# MMS Reset????

*2767*77927# Spain WAP Setting are applied
*2767*78927# Portugal
*2767*29927# Czech
*2767*65927# Netherlands
*2767*28927# Austria
*2767*37927# France
*2767*48927# Italy
*2767*85927# Uk
*2767*33927# Germany
#7263867# Ram Dump On
#*3232# Current Mode - DCD mode
#*3231# DCD en TRACE dis
#*3230# TRACE en DCD dis
#*7247# ??????
#*3683# ??????
#*3777# ??????
#*3779# ??????
#*8645# ??????
#*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt
#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt
*#7465625# Secret Menu
#7465625*28746# ?
*7465625*28746# ?
#7465625*2827# ?
*7465625*2827# ?
#7465625*2877# ?
*7465625*2877# ?
#7465625*28782# ?
*7465625*28782# ?
#7465625*28638# ?
*7465625*28638# ?
#7465625*228# ?
*7465625*228# ?
#7465625*746* ?
*7465625*746* ?
#7465625*27* ?
*7465625*27* ?
#7465625*77* ?
*7465625*77* ?
#7465625*782* ?
*7465625*782* ?
#7465625*638* ?
*7465625*638* ?
*#8377466# SW + HW info
*#8888# HW info
*#9999# SW info
*#8999*8376263# komplet info
*#8999*636# IPD info
#*2677# ARM state: None
#*0000# ??????
*#8999*324# Net monitor??
#*6200#
#*6700#
#*6900#
#*7200# neplatn? ?roven pr?stupu
#*6100# command #*6100# Executed
*2767*3700# SGH-E700 BSI
*2767*7100# SGH-S100
*2767*8200# SGH-V200
*2767*7300# SGH-S300
#0111*codigo#
*2767*637#
*2767*688#
*2767*wap#
*2767*media#
*2767*mms#
*2767*226372# Camera Reset
*2767*688# MEP off
*2767*927# WAP
*2767*2878# E2P Custom reset
*2767*3855# E2P Full reset
*2767*2878# Sec reset
#*7828# C??? Midi Ri51
#*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff
#*2562# nejakej reset
#*2565# no blocking General Defense
#*3353# General defense Code Erased
#*3837# reset ???????
#*3849# reset ???????
#*3851# reset ???????
#*3876# reset ???????
#*7337# reset ???????
#*5376# reset All SMS Deleted
#*7222# Operation Typ: Class C GSM
#*7224# Error!!!!
#*7252# Operation Typ: Class B GSM
#*7271# multi Slot Class 1 GPRS
#*7274# multi Slot Class 4 GPRS

#*2787# CRTP on - Batery options
#*3737# L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0
#*3825# Command #*3825# Executed
#*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH 40
#*7288# GPRS Detached
#*7287# GPRS Detached
#*7666# SrCell data RAC 255 NMO 255
#*7693# Sleep Deact
#*7284# Class B
#*2256# Calibr - info
#*2286# DATAbattery
#*2527# GPRS switching set to class 4
#*2679# Copycat feat. Activated
#*3940# External looptest 9600bps not avalible in SYSOL2!
#*4263# handsfree mode Activated
#*4700# Half rate deact
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in cihard.opt
#*8462# Sleeptime sinc SwitchOf
#*2558# Time ON For Cmd set DEBUGBATTERY in cihard.opt
#*3370# EFR Deact
#*3941# External looptest 115200bps not avalible in SYSOL2!
#*5176 L1 Sleep TOI N:5 TOI P:0
#*7462# SIM phase 3
#*7983# Vol***e/Freg Deact
#*7986# Vol***e Activated
#*8466# Old time
#*2255# Call failed mode: Command not Implemented
#*2285 ?
#*46539 ?
#*5143 ?
#*7629 ?
#*7646 ?
#*7665 ?
#*7633 ?
#*7626 ?
#*5174 ?
#*5175 ?
#*5177 ?
#*5156 ?
#*2282 ?
#*5132 ?
#*7276 ?
#*2355 ?
#*3333 ?
#*3377 ?
#*5187# L1C2G trace Activated
#*6837# Official SW version: 120107A1
#*7524# KCGPRS: +data
#*7562# LOCI GPRS: +data
#*7638# RLC allwazs open ended TBF Actiated
#*7632# Sleep mode Debug: +data
#*7673# Sleep mode RESET
#*2337# Permanent Registrtion Beep: NOT YET IMPLEMENTED
#*2474# For Cmd set DEBUGBATTERY in cihard.opt
#*2834# Audio Pth Mobile Normal
#*3270# DCS support Deact
#*3282# Data Deact
#*3476# EGSM Deact
#*3676# falh volume formated
#*4674# IMSI: +data
#*4760# GSM Activated
#*4864 pro tento model nic
#*5171 data
#*5172 data
#*5173 data
#*7326# Accessorz: vibrator
#*7676# Command #*7676# Executed
#*7683# Sleep variable
#*7762# SMS Bearer CS Activated
#*7957# Command #*7957# Executed
#*8465# Time in L1 +data
#*9278# Command #*9278# Executed
#*9795# WTLS key Reset
#*2252# Current call: +data
#*2836# AVDDSS Managment Deact.
#*3877# Dump of SPY trace: +data
#*7728# RSAV done

NEC SECRET


NEC - Service Codes
password is an 8 digits number
Info Sim lock *#4960# >Send button
Lock *#4960*code*code# >Send button
Unlock *#4960*code# >Send button
See lock status SP *#3210# >Send button
See lock status NET *#8140# >Send button
Info version *#2820#
Hard reset *73738# > Send
"Please Wait" *#3727372# (for models N21i N22i N221i)
Reset to default *#2220# > Send
GPRS Unlock *#2634# > Send
Subnet Unlock *#1110#> Send
Unlock Without simcard enter #7320*unlock code# or #3210* unlock code#
For Nec 342i without sim card **00012*unlock code#

Sharp - Service Codes
*01763*8371# check software version type
Sharp TM150 :
*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER1#) --- Firmware Version
-----------------------------------------------------------------
sharp reset EEP
1, push at once key 0+3+right option key up+red key (white screen)
2, in sequence push key 0,1,2,3, right option key up,1 (service menu)
3, write 99 and push right option key up
4, write 01 and push right option key up (now start RESET EEPROM)
Wait.....
5, push any key
6, push blue key menu (save)
7, power off

Sharp GX-10 unlock solution
With Sim Card (of locked network) in phone:
*01763*6371# and press M.
In menu go to: SETTINGS->SELECT->SECURITY
then in Security menu:MEP LOCKS->SELECT
insert default security code 0000
In menu go to NETWORK and choose DEACTIVATE
press SELECT and insert 812664697614
Press OK, phone anwser will be: DONE .
phone unlocked
Sharp Gx15/20/30 Tm100
Phone is on test mode
you can see **** on phone display
For finishing unlock folow the next steps :
Press 1 on phone keypad
Press 99
Press right top key
Press 3 FOR UNLOCK
or Press 1 FOR FACTORY DEFAULT
Press roight top key
Wait to see on display format ok
Press right top key 3 times or more until phone is off

SONY ERICCSON SECRET
Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You'll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this menu (main display, camera, LED/illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests)

IMEI Number: *#06#
Lockstatus: <- * * <-
Shortcut to last dialed numbers: 0#
Shortcut to sim numbers: On main menu type a number and press #

If you change the language from default to any other language, then it may be difficult to switch to default language. The shortcut is very simple. Just press < 0000 > . < stands for left arrow button or joystick and > stands for right arrow button or joystick.

ALCATEL SECRET
Alcatel - Service Codes
For E Series:
Next codes work on alcatel E Series...
*#8273*# - Network Services
###847# - General reset
*7528*# - Simlock Flags
*#7253*# - Total call duration
*#7846*# - Reset to idle disabled...
*#7849*# - Reset to idle enabled
*#3377*# - Config as clam phone
*#2277*# - Config as bar phone
*#3646*# - Engineering module
*#7378*# - Reset informaions
*#6362*# - Free memory
*#3862*# - Test mode -- usually keypad..
*#4837*# - Internal vesion
*#3837*# - Version revision
Older Alcatel Models:
Enter Service Menu : *#000000#
View Secret Menu : 000000 and press *
To remove the security codes :
HD1,HE1 : 25228353
BE1,BE3 : 25228352
BE4,BE5 : 83227423
BG3.BH4 : 83227423
TH3.TH4 : 83227423

Init codes:
###847# Reset to factory defaults (danger...)
###337*07# Phone restart
Language selectors:
*#0000# Automatic
*#00xx# xx= 07,27,41,44,61,63,64,84,91,92,94 English
xx= 43,49 Deutsch
xx= 48 Polski
*#0420# Czech
*#0421# Slovak
-Lock/Unlock codes:
(ask your Provider for network codes... )
000000* Entering in Engineering Menu1 (with SIM)
###874# Reset to Factory Defaults (with SIM)
###765*02# Add Barring Groups
###765*05# Locking to Network
###765*07# Unlocking from Network
###765*08# Erase Network
###765*78# Deactivate Barring Groups
LG MOBILE
IMEI (ALL): *#06#
IMEI and SW (LG 510): *#07#
Software version (LG B1200): *8375#
Recount cheksum (LG B1200): *6861#
Factory test (B1200): #PWR 668
Simlock menu (LG B1200): 1945#*5101#
Simlock menu (LG 510W, 5200): 2945#*5101#
Simlock menu (LG 7020, 7010): 2945#*70001#
Simlock menu (LG 500, 600): 2947#*

Code to read phone version :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'SW Ver.info'
Code to reset phone :
- Phone without SIM
- Enter 277634#*# or 47328545454#
- Select 'Factory Reset'
Code to enter UNLOCK MENU :
- Phone wit SIM inside
- Enter 2945#*88110#
Test Menu 8330 : 637664#*#
Test Menu 8180 V10a: 49857465454#
Test Menu 8180 V11a: 492662464663#
Test Menu 8130-8138: 47328545454#
Test Menu 8110-8120: 277634#*#
MOOTOROLA SECRET
IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.

Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []


Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []

There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.

You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)

MOBILE SECRECT

ဒီ code ေတြဟာ ဟန္းဖုန္းရဲ႕ လွ်ိဳ႕၀ွက္ကုတ္ေတြပါ .. ဘယ္ဖုန္းစာအုပ္ထဲမွာမွ ရွာလုိ႔ေတြ႔မွာ မဟုတ္ပါဘူး ..
service သမားေတြပဲ သိတာပါ ဒီ code ေတြကုိ ..

Nokia
*#06# for checking the IMEI
*#7780# reset to factory settings
*#0000# software version
*#2820# bluetooth device address

sony ericsson
->*<-<-*<-* secret Menu *#06# IMEL number <-**<- Lockstatus (->means press joystick to the right

Motorolla
*#06# IMEL number
[][][]004[]1[] change pin
[][][]119[]1[] Enable EFR
[][][]###[]1[] Function
[]means the *key held in until box appear

IPHONE SECRET CODES
3001#12345#* and tap Call. Enter Field Mode.
Field mode reveals many of the inner settings of your iPhone,
specifically up-to- date network and cell information.

*#06# Displays your IMEI. No need to tap Call.
IMEI is the unique identifier for your cell phone hardware. Together with your SIM information it identifies you to the provider network.

*777# and tap Call. Account balance for prepaid iPhone.

*225# and tap Call. Bill Balance. (Postpaid only)
*646# and tap Call. Check minutes. (Postpaid only)
These three are pretty self explanatory.
*#21# and tap Call. Setting interrogation for call forwards.
Discover the settings for your call forwarding. You’ll see whether you have voice, data, fax, sms, sync, async, packet access, and pad access call forwarding enabled or disabled.
*#30# and tap Call. Calling line presentation check.
This displays whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.
*#76# and tap Call. Check whether the connected line presentation is enabled or not.
State whether the connected line presentation is enabled or disabled. Presumably similar to the calling line presentation.
*#43# and tap Call. Determine if call waiting is enabled.
Displays call waiting status for voice, data, fax, sms, sync data, async data, packet access and pad access. Each item is either enabled or disabled.
*#61# and tap Call. Check the number for unanswered calls.
Show the number for voice call forwarding when a call is unanswered. Also show the options for data, fax, sms, sync, async, packet access and pad access.
*#62# and tap Call. Check the number for call forwarding if no service is available.
Just like the previous, except for no-service rather than no-answer situations.
*#67# and tap Call. Check the number for call forwarding when the iPhone is busy.
And again, but for when the iPhone is busy.
*#33# and tap Call. Check for call control bars.
Check all the usual suspects (voice, data, fax, sms, etc) to see whether barring is enabled or disabled for outgoing.


ဟန္းဖုန္းတစ္လုံးရဲ႕ အသုံး၀င္မႈ
(၁) အေရးေပၚ အတြက္
keypad ကို locked လုပ္ထားရင္ေတာင္ သင့္ လက္ကိုင္ဖုန္းမ်ားဟာ 112 ဆိုတဲ့ နံပါတ္ကို ႏွိပ္လို႕ ရတာ ေတြ႕ရ ပါလိမ့္မယ္။ အဲဒီနံပါတ္ဟာ ကမၻာလံုးဆိုင္ရာ ၊ ႏိုင္ငံတကာ အေရးေပၚ ဖုန္းနံပါတ္ ျဖစ္ပါတယ္။ သင္သာ လက္ကိုင္ဖုန္း ဆက္သြယ္ႏိုင္တဲ့ ဧရိယာထဲမွာ ရွိေနပါေစ၊ ဒီနံပါတ္ကို ႏွိပ္လိုက္တာနဲ႕ သင့္လက္ကိုင္ဖုန္းဟာ အနီးဆံုး ဆက္သြယ္မႈ ကြန္ယက္ကို အလိုအေလ်ာက္ ရွာမွာ ျဖစ္ပါတယ္။ လက္ကိုင္ဖုန္းက ခလုတ္မ်ားကို ပိတ္ထားရင္ေတာင္ ဒီနံပါတ္ကိုေတာ့ ႏွိပ္လို႕ ရေနမွာ ျဖစ္ပါတယ္။
(၂) ကားထဲမွာ ေသာ့ေတြ က်န္ခဲ့လား
သင့္ကားတံခါးမွာ အေ၀းထိန္းစနစ္ ရွိပါသလား။ တေန႕မွာ အေ၀းထိန္း မဟုတ္ဘဲ လက္နဲ႕ ဖြင့္ရမယ့္ အေန အထား ၾကံဳတတ္ပါတယ္။ ကားေသာ့ကို ကားထဲ ထည့္ခဲ့ၿပီး အပိုေသာ့က အိမ္မွာ က်န္ခဲ့ရင္ လက္ကိုင္ဖုန္း တစ္လံုး ရွိရတာ ဒီလုိအခါ က်ေတာ့ ေကာင္းလုိက္တာ။ အိမ္မွာ က်န္ခဲ့တဲ့ လူရဲ႕ လက္ကိုင္ဖုန္းကို သင့္လက္ကိုင္ဖုနး္ကေန ေခၚပါ။ တဖက္က ျပန္ထူးေနရင္ သင့္လက္ကိုင္ဖုန္းကို ကားတံခါးကေန ေျခတလွမ္းအကြာမွာ ထားပါ။ ေနာက္ၿပီး အိမ္ကလူကို ကားေသာ့ဖြင့္တဲ့ ခလုတ္ကို လက္ကိုင္ဖုန္းနားကပ္ၿပီး ႏွိပ္ခိုင္းပါ။ ဟဲဟဲ.. စမး္ၾကည့္ရတာ စိတ္လႈပ္ရွားစရာ ေပ်ာ္စရာပဲ မဟုတ္လား။ ကၽြန္မတို႕ စမ္းၾကည့္တာ ေအာင္ျမင္တယ္ရွင့္။ အိမ္ကလူက လာေပးစာ မလိုေတာ့ဘူးေပါ့။ အကြာအေ၀းက အေရး မဟုတ္ပါဘူး။ ေသာ့အပိုက မိုင္တရာ အကြာမွာ ရွိေနပါေစ ခုနက နည္းနဲ႕ သင့္ကား တံခါးကို အလြယ္တကူ ဖြင့္ႏိုင္တာ သင့္လက္ကိုင္ဖုန္းေၾကာင့္ပ ါ။

(၃) ဖြက္ထားတဲ့ အပို ဘကၴရီ
သင့္လက္ကိုင္ဖုန္း ဓာတ္အား သိပ္နည္းလာၿပီဆုိပါစို႕။ *3370# ကို ႏွိပ္လိုက္ပါ။ သင့္ လက္ကိုင္ဖုန္းက အေရးေပၚသံုး ခ်န္ထားတဲ့ ဓာတ္အား ကို ျပန္ဖြင့္ေပးၿပီးေနာက္ သင့္လက္ကိုင္ဖုန္းက ဓာတ္အား ထက္၀က္ က်န္ေသးေၾကာင္း ျပပါလိမ့္မယ္။ ေနာက္တစ္ၾကိမ္ သင့္လက္ကိုင္ဖုန္းကို ဓာတ္အား ျပန္ျဖည့္တဲ့အခါမွာ သာမန္နဲ႕ အေရးေပၚသံုး ႏွစ္မ်ိဳးလံုး အတြက္ ဓာတ္အားကို ျပန္ျဖည့္ပါလိမ့္မယ္။ Safety first !!! ပါတဲ့။

(၄) အခိုးခံရတဲ့ လက္ကိုင္ဖုန္းကို သူတပါး သံုးလို႕ မရေတာ့ေအာင္ ဘယ္လို ဖ်က္ဆီး ပစ္မလဲ။
သင့္ လက္ကိုင္ဖုန္းရဲ႕ နံပါတ္စဥ္ကို သိဖို႕ *#06#ကို ႏွိပ္လိုက္ပါ။ ဂဏန္း ၁၅လံုး (ဆယ့္ငါးလံုး) ေပၚလာပါ လိမ့္မယ္။ အဲဒီ ဂဏန္း ဆယ့္ငါးလံုးဟာ သင့္လက္ကိုင္ဖုန္း (handset) အတြက္ သီးသန္႕ပါ။ ဒီ ဂဏန္းေတြကို ခ်ေရးၿပီး လံုျခံဳ စိတ္ခ်ရတဲ့ တေနရာမွာ သိမ္းထားပါ။ သင့္ဖုနး္ အခိုးခံရတဲ့ အခါမွာ သင္ဟာ ဖုန္း ကုမၸဏီကို ဖုန္းဆက္ၿပီး ဂဏန္း ဆယ့္ငါးလံုးပါ ကုဒ္ကို ေျပာျပ တိုင္တန္းလုိက္ၿပီး သင့္ လက္ကိုင္ဖုန္းကို ပိတ္ခိုင္း ႏိုင္ပါ တယ္။ တကယ္လို႕ သူခိုးဟာ Sim Card ကို မထုတ္ရေသးမီ သင္သာ တုိင္တန္းႏိုင္မယ္ ဆုိရင္ Sim card ကိုေရာ လက္ကိုင္ဖုန္းကိုပါ disable လုပ္ႏိုင္မွာ ျဖစ္လို႕ သင့္ဖုန္းထဲက သင့္ဆက္သြယ္မႈ ကြန္ယက္ ထဲက သူေတြ စာရင္းနဲ႕ ဖုန္းနံပါတ္ မ်ားကိုလဲ သူတပါး သိျခင္းမွ ကာကြယ္ ႏိုင္သလို သင့္အေယာင္ ေဆာင္ၿပီး သူတပါးကို သင့္ဖုန္း နံပါတ္နဲ႕ ဆက္သြယ္ျခင္း ကိုပါ ကာကြယ္ ႏိုင္မွာ ျဖစ္ပါတယ္။ တကယ္လို႕ သင္ တိုင္တန္း တာ ေနာက္က်လို႕ သူခိုးက ပိုလ်င္သူ ျဖစ္ခဲ့ရင္ေတာ့ သင့္ Simcard ကိုသာ disable လုပ္ႏိုင္မွာ ျဖစ္ၿပီး သင္ ဟာ ဖုန္းနံပါတ္မ်ားကို လက္ကိုင္ဖုန္း ထဲမွာ မွတ္သား တတ္သူ ျဖစ္ပါက သင့္ ဆက္သြယ္မႈ ကြန္ယက္ ကိုေတာ့ သူခိုးက ေကာင္းေကာင္း သိႏိုင္ပါတယ္။ ဒါေပမယ့္ သင့္နံပါတ္နဲ႕ သူတပါးကို ဖုန္းဆက္ျခင္းေတာ့ မျပဳႏိုင္ေတာ့ ပါဘူး။ ဒါေၾကာင့္ အေရးၾကီး ဖုန္းနံပါတ္မ်ားကို Sim Card ထဲမွာသာ မွတ္သား ထားသင့္ ပါတယ္။ ဒီလို ကာကြယ္ ထားႏိုင္ရင္ လက္ကိုင္ဖုန္း ခိုးယူျခင္း ေၾကာင့္ အက်ိဳး မျဖစ္ထြန္းတဲ့ အတြက္ လက္ကိုင္ဖုန္း ခိုးယူမႈမ်ား ေလ်ာ့ပါး လာမယ္လို႕ ေမွ်ာ္လင့္ရပါတယ္။

No comments:

Post a Comment

Post a Comment